Coconut Grater and Peeler Machine Together

Coconut Grater and Peeler Machine Together - Indonesia is one of the largest coconut producers in the world. This condition would be an advantage if it is offset by the proper post-harvest technology. It is able to cut down the level of damage caused by shrinkage and improve the agricultural products quality sold.

Advancement of proper technology, many find the tools of technology to process agricultural products. The aim is to improve the marketability and can ease the job. One of the end products of coconut that has a high sales value is coconut milk. Stages of manufacture of milk is through several stages, among others (1) separating coconut fiber, (2) separating coconut shells, (3) peeling coconut husk, (4) scraping coconut meat and (5) extortion grated results. In small industries (home industry) fifth stage of the use of equipment or a separate machine, so it requires high investment costs.

Therefore, this article will present the model of coconut grater and peeler machine together.

Construction of Coconut Grater and Peeler Machine

Coconut grater and peeler machine construction with the major components, as shown in the following figure:

Coconut Grater Concept

This concept uses a system of manual grater with developing a scaly cylindrical shape. In the manual system, coconut rubs against with grater stationary, while on this system, a grater cylindrical rotating swipe flaky coconut. Friction between the cylinder flaky coconuts will result in the grated coconut. The smaller scales on the cylinder it will be the small amount of the grated it.

Coconut Peeler Concept

Separation process occurs when the coconut skin contact with a pressure board knife. More the blade pressure, the higher the peeling coconut skin. Knife pressure should adjust to the thickness of the coconut shell. If the pressure is too large can cause peeling inside the white coconut. Therefore, on this machine peeling knives are on the disc-shaped plate. Disc serves as a barrier thickness when the coconut contact with a peeling knife, coconut will last on the disk and coconut skin will peel off only by a knife that appears above the disc.

Principle of Coconut Grater and Peeler Machine

In general, coconut grater and peeler machine is a tool designed to use power from the electric motor. Power transmission of the electric motor and the grater peeler is using v-belt transmission. On the specifications, the electric motor rotational speed is 1450 rpm, the speed is too high to coconut peel and grid so that v-belt transmission using ratio of 1: 2.

Coconut peeler consists of a blade mounted on the disk angular chips. Disc rotates in the rotation direction of electric motor and the tip of a paring knife. Coco moves in a straight line in the disk direction, so that prepared by the rotating blades. Rasp consists of a cylindrical wheel having a large number of blades. Coconut grater wheel rotates in the rotation direction of electric motors and go directly to the coconut grater wheels and eroded by a spinning wheel.

Operations of Coconut Grater and Peeler Machine

How to run coconut grater and peeler machine is:

1. Make sure the container is under spending funnel, so that the results properly seated grated coconut.
2. Connect the power cord to the terminal.
3. Press the power button.
4. When the switch is ON, coconut peeler blade and coconut grater wheels spin, never include metal objects or other hard objects in the coconut peeler or coconut grater system.

Coconut peeling Process

1. Hold the coconut with a strong, and then hold in the peeling direction of the rotating blade. Be careful not to hit the hands of a knife.
2. Press coconut to disc blade, so knife will peel a coconut.
3. Turn the coconut until the entire surface of the coconut peeled skin.

Coconut grated process

1. Coconuts peeled separate for four or more parties.
2. Put the coconut separated above the feeder.
3. Push the coconuts in the spinning direction wheel grater, so that the wheels started slashing or grate the coconut.
4. Results will grate out through the funnel and into the reservoir.
5. Never push coconut by hand, if the piece of coconuts has been short. Use the tool to push coconuts.
6. Turn off the power button.

That is a description about the Coconut Grater and Peeler Machine Together. If you find misconceptions in this post, please give correction in the comment box.